P: No se muestra la temperatura ambiente.
A: The device is designed to display the ambient temperature only when it exceeds 122°F (50°C). This is because the thermocouple sensor used in our probe requires a temperature difference between the internal meat temperature and the ambient temperature to operate. If the temperature difference is too close, the thermocouple sensor will not work. Therefore, the device only displays ambient temperatures above 50°C (122°F) due to this technical requirement.
Q: Stand/Probe won’t pair to my phone, Bluetooth won’t connect/Bluetooth connection is stuck on C-1.
A: Please confirm if your operation is correct. You can refer to the video below for detailed steps.
Si no se puede resolver el problema, consulte los siguientes pasos:
Confirma si has otorgado los permisos de Bluetooth y ubicación a la aplicación ChefsTemp, y si todas las sondas están cargadas.
Eliminar conexiones actuales: Asegúrese de haber eliminado todas las conexiones existentes en la aplicación.
Reinicia el dispositivo: Después de eliminar las conexiones, apaga completamente el soporte y luego reinícialo.
Vuelve a emparejarlo desde el principio: Una vez que lo hayas reiniciado, intenta emparejarlo de nuevo desde el principio.
Siga los pasos para eliminar las conexiones:
Si persisten los problemas, envíenos un vídeo del funcionamiento y un vídeo de su aplicación LightBlue para que podamos analizarlos (cuando el soporte y las sondas estén cargados, la palabra "Probe" aparecerá en la pantalla LightBlue para cada sonda, sin numerar, y las palabras "ProTemp Stand" aparecerán para el soporte).
P: Pulso el botón, pero el soporte no responde/el soporte no se enciende.
A: Check if the buttons are stuck and whether the press sensation on both sides of the buttons is the same, to confirm if the buttons are damaged. If the not, use a charger to charge the stand and then restart it. And please note that the button on the left is designed with different press durations for different functions: a press of 2-3 seconds can turn the device on and a longer press, about 4-5 seconds, can switch it off.
P: No puedo cargar otros dispositivos.
A: Please note that the port on the left is for charging the stand, while the port on the right allows the stand to charge other devices.
El ProTemp Plus no es compatible con la carga de teléfonos Apple. Además, el puerto de carga solo admite cables USB-C.
P: ¿Por qué tengo que registrar una cuenta en la aplicación?
A: The purpose of creating an account is to facilitate seamless usage of the device among family members through a single account. Additionally, registering an account enables access to cloud storage services.
Nuestro producto utiliza Wi-Fi para la transmisión de datos en la nube, lo que garantiza una conectividad fluida y permite a los usuarios acceder a sus datos de temperatura de forma remota. Esta es la característica única de nuestro termómetro que lo distingue de otros termómetros inalámbricos para carne con Bluetooth. Para mantener el acceso a las funciones de datos en la nube, es necesario registrarse.
Tenga la seguridad de que priorizamos la privacidad y la seguridad de la información personal de nuestros clientes. Contamos con estrictas medidas para garantizar que sus datos permanezcan confidenciales y no se divulguen a terceros. Además, nuestra aplicación no enviará mensajes publicitarios.
P: No se pueden cargar las sondas.
A: Please restart the stand, then place the probe on another socket to charge it. (both the front and back sockets can be used to charge the probe) And please clean the remaining grease on the probe before charging.
P: No se puede cargar el soporte.
A: Please note that the port on the left is for charging the stand, while the port on the right allows the stand to charge other devices.
Utilice una toma de corriente de alta potencia para cargar el soporte y tenga cuidado de que el puerto de carga no se moje.
P: La medición de la temperatura de la carne/temperatura ambiente es incorrecta.
A: To ensure accurate ambient temperature readings, when inserting the probe into the meat, ensure that it’s inserted past the safety notch on the probe. Make sure the ceramic handle of the probe is at least 1cm away from the meat or grill racks. Placing it too close can cause the meat to absorb heat from around the probe, leading to lower temperature readings.
La lectura de temperatura ambiente de nuestra sonda inalámbrica puede verse afectada por diversos factores, como la temperatura de la carne o los niveles de humedad. A diferencia de las sondas con cable, el sensor inalámbrico necesita tiempo para ajustarse y proporcionar lecturas; debido a esta sensibilidad, las temperaturas pueden variar según la ubicación.
Tenga cuidado de no permitir que la sonda entre en contacto directo con objetos de alta temperatura, como llamas o hornos, ya que exceder el rango máximo de lectura puede dañar la sonda y provocar lecturas inexactas.
P: La sonda se desconecta durante su uso.
A: If the oven has strong sealing, it may affect the emission of probe signals. Please move the stand to a better signal location to receive the signal emitted by the probe, and test whether the base can receive Wi-Fi signals properly.
Si no se puede resolver el problema, consulte los siguientes pasos:
Eliminar conexiones actuales: Asegúrese de haber eliminado todas las conexiones existentes en la aplicación.
Reinicia el dispositivo: Después de eliminar las conexiones, apaga completamente el soporte y luego reinícialo.
Volver a emparejar desde el principio: Una vez que lo hayas reiniciado, intenta emparejarlo de nuevo desde el principio.
Siga los pasos para eliminar las conexiones:
Q: Wi-Fi won’t connect.
A: please refer to the following steps:
Asegúrate de tener el nombre correcto de la red Wi-Fi. Puedes encontrarlo automáticamente haciendo clic en el icono de la lupa en la página de configuración de Wi-Fi.
Comprueba dos veces que has introducido la contraseña correcta para tu red Wi-Fi.
Utilice una red de 2,4 GHz; el dispositivo debe estar conectado a una red de 2,4 GHz, no a una de 5 GHz.
Asegúrese de que su teléfono también esté utilizando la red de 2,4 GHz durante la configuración.
Para dispositivos Apple, active la opción "Permitir la conexión con dispositivos cercanos" en la configuración. Esta es una actualización reciente de iOS.
Encienda el Bluetooth en su dispositivo.
Concede permiso de ubicación a la aplicación para una mejor conectividad.
Después de verificar que la configuración anterior sea correcta, elimine todas las conexiones actuales, apague el soporte, reinícielo y vuelva a emparejarlo desde el principio. Siga los pasos para eliminar las conexiones:
elizabethmoore –
I can’t imagine cooking without this thermometer. It’s fast, precise, and easy to clean. Highly recommended for any home cook or professional chef!
chbrei123 –
Easy to install app for my phone. I made Prime rib and it turned out perfect. The app shows you different recipes or you can decide how long to cook your meat. I made my Prime Rib in my Nesco roaster and the app showed me a graph of how my meat was cooking and how many minutes until it was done. When you take your meat out of the roaster the app will tell you how long to rest it and when it’s ready. This is my first time using this and it is very user friendly. I would definitely recommend this product.
davidmiller –
ProTemp Plus makes cooking so much easier! I love the clear, instant temperature readings. It’s compact, sturdy, and a real game-changer for BBQs and roasts.
lauraanderson –
Fantastic product! The readings are instant, accurate, and reliable. I’ve tested it against other thermometers, and this one consistently outperforms. Great build quality too!
tomcluphonework –
I’ve always prided myself in cooking a good steak, but this has made meals a lot easier. It took a few uses to really trust it, but now that I do I can start my cook and then go about preparing sides, washing dishes, etc. The app is easy to use and the voice prompts are great for the times when I zone out a bit and forget where I’m at.
jameswilson –
Professional-grade accuracy with a simple interface. This thermometer is worth every cent. It instantly reads temperatures and makes my grilling and baking sessions stress-free. Highly recommended!
shalarob1 –
I love the cordless aspect as the typical probe cords get kinked or messy in storage between uses. Also, being such a small probe, you don’t need to worry about the wires or length of probe extending out or sitting between the lid and base of your cooking device.
emilydavis –
Amazing speed and precision! ProTemp Plus has become a staple in my kitchen. I’ve used it for everything from roasts to cake making, and it always delivers perfect temps!
rcook1125 –
I am scared when it comes to cooking meats because I am afraid of burning it or not cooking it enough and giving myself food poisoning.
This device helps with that fear in knowing when to flip and when to remove from the griddle! I love that I can rely on it to tell me when my meat is done the way I like it!
michaelbrown –
Love this thermometer! Fast, accurate, and the thin probe means minimal juice loss from meats. It’s a must-have for my BBQs. Great product!