P: No se muestra la temperatura ambiente.
A: The device is designed to display the ambient temperature only when it exceeds 122°F (50°C). This is because the thermocouple sensor used in our probe requires a temperature difference between the internal meat temperature and the ambient temperature to operate. If the temperature difference is too close, the thermocouple sensor will not work. Therefore, the device only displays ambient temperatures above 50°C (122°F) due to this technical requirement.
Q: Stand/Probe won’t pair to my phone, Bluetooth won’t connect/Bluetooth connection is stuck on C-1.
A: Please confirm if your operation is correct. You can refer to the video below for detailed steps.
Si no se puede resolver el problema, consulte los siguientes pasos:
Confirma si has otorgado los permisos de Bluetooth y ubicación a la aplicación ChefsTemp, y si todas las sondas están cargadas.
Eliminar conexiones actuales: Asegúrese de haber eliminado todas las conexiones existentes en la aplicación.
Reinicia el dispositivo: Después de eliminar las conexiones, apaga completamente el soporte y luego reinícialo.
Vuelve a emparejarlo desde el principio: Una vez que lo hayas reiniciado, intenta emparejarlo de nuevo desde el principio.
Siga los pasos para eliminar las conexiones:
Si persisten los problemas, envíenos un vídeo del funcionamiento y un vídeo de su aplicación LightBlue para que podamos analizarlos (cuando el soporte y las sondas estén cargados, la palabra "Probe" aparecerá en la pantalla LightBlue para cada sonda, sin numerar, y las palabras "ProTemp Stand" aparecerán para el soporte).
P: Pulso el botón, pero el soporte no responde/el soporte no se enciende.
A: Check if the buttons are stuck and whether the press sensation on both sides of the buttons is the same, to confirm if the buttons are damaged. If the not, use a charger to charge the stand and then restart it. And please note that the button on the left is designed with different press durations for different functions: a press of 2-3 seconds can turn the device on and a longer press, about 4-5 seconds, can switch it off.
P: No puedo cargar otros dispositivos.
A: Please note that the port on the left is for charging the stand, while the port on the right allows the stand to charge other devices.
El ProTemp Plus no es compatible con la carga de teléfonos Apple. Además, el puerto de carga solo admite cables USB-C.
P: ¿Por qué tengo que registrar una cuenta en la aplicación?
A: The purpose of creating an account is to facilitate seamless usage of the device among family members through a single account. Additionally, registering an account enables access to cloud storage services.
Nuestro producto utiliza Wi-Fi para la transmisión de datos en la nube, lo que garantiza una conectividad fluida y permite a los usuarios acceder a sus datos de temperatura de forma remota. Esta es la característica única de nuestro termómetro que lo distingue de otros termómetros inalámbricos para carne con Bluetooth. Para mantener el acceso a las funciones de datos en la nube, es necesario registrarse.
Tenga la seguridad de que priorizamos la privacidad y la seguridad de la información personal de nuestros clientes. Contamos con estrictas medidas para garantizar que sus datos permanezcan confidenciales y no se divulguen a terceros. Además, nuestra aplicación no enviará mensajes publicitarios.
P: No se pueden cargar las sondas.
A: Please restart the stand, then place the probe on another socket to charge it. (both the front and back sockets can be used to charge the probe) And please clean the remaining grease on the probe before charging.
P: No se puede cargar el soporte.
A: Please note that the port on the left is for charging the stand, while the port on the right allows the stand to charge other devices.
Utilice una toma de corriente de alta potencia para cargar el soporte y tenga cuidado de que el puerto de carga no se moje.
P: La medición de la temperatura de la carne/temperatura ambiente es incorrecta.
A: To ensure accurate ambient temperature readings, when inserting the probe into the meat, ensure that it’s inserted past the safety notch on the probe. Make sure the ceramic handle of the probe is at least 1cm away from the meat or grill racks. Placing it too close can cause the meat to absorb heat from around the probe, leading to lower temperature readings.
La lectura de temperatura ambiente de nuestra sonda inalámbrica puede verse afectada por diversos factores, como la temperatura de la carne o los niveles de humedad. A diferencia de las sondas con cable, el sensor inalámbrico necesita tiempo para ajustarse y proporcionar lecturas; debido a esta sensibilidad, las temperaturas pueden variar según la ubicación.
Tenga cuidado de no permitir que la sonda entre en contacto directo con objetos de alta temperatura, como llamas o hornos, ya que exceder el rango máximo de lectura puede dañar la sonda y provocar lecturas inexactas.
P: La sonda se desconecta durante su uso.
A: If the oven has strong sealing, it may affect the emission of probe signals. Please move the stand to a better signal location to receive the signal emitted by the probe, and test whether the base can receive Wi-Fi signals properly.
Si no se puede resolver el problema, consulte los siguientes pasos:
Eliminar conexiones actuales: Asegúrese de haber eliminado todas las conexiones existentes en la aplicación.
Reinicia el dispositivo: Después de eliminar las conexiones, apaga completamente el soporte y luego reinícialo.
Volver a emparejar desde el principio: Una vez que lo hayas reiniciado, intenta emparejarlo de nuevo desde el principio.
Siga los pasos para eliminar las conexiones:
Q: Wi-Fi won’t connect.
A: please refer to the following steps:
Asegúrate de tener el nombre correcto de la red Wi-Fi. Puedes encontrarlo automáticamente haciendo clic en el icono de la lupa en la página de configuración de Wi-Fi.
Comprueba dos veces que has introducido la contraseña correcta para tu red Wi-Fi.
Utilice una red de 2,4 GHz; el dispositivo debe estar conectado a una red de 2,4 GHz, no a una de 5 GHz.
Asegúrese de que su teléfono también esté utilizando la red de 2,4 GHz durante la configuración.
Para dispositivos Apple, active la opción "Permitir la conexión con dispositivos cercanos" en la configuración. Esta es una actualización reciente de iOS.
Encienda el Bluetooth en su dispositivo.
Concede permiso de ubicación a la aplicación para una mejor conectividad.
Después de verificar que la configuración anterior sea correcta, elimine todas las conexiones actuales, apague el soporte, reinícielo y vuelva a emparejarlo desde el principio. Siga los pasos para eliminar las conexiones:
amandathomas –
I’m impressed with the ProTemp Plus. It’s a reliable tool that takes the guesswork out of cooking. The quick response time and precise readings are game-changers. A must-have for anyone who loves to cook meat to perfection.
Jos62481 –
This works great and Thanksgiving turkey was perfect. I bought the single probe and I recommend it.
richardwhite –
Excellent thermometer! It reads temps instantly and accurately. My grilling and baking game has improved tremendously thanks to this device. A must-have kitchen tool!
vernon0508 –
I smoked a pork shoulder yesterday and used the thermometer for the first time. The app is user friendly and I loved keeping track of the constant temp throughout the four hour cooking time.
hannahthomas –
I’ve tried several thermometers, but this is the best. Fast, accurate readings every time. Perfect for grilling and baking. Highly recommended to anyone serious about cooking!
williamking –
So impressed with the speed and accuracy! ProTemp Plus reads temps instantly, making cooking stress-free. It’s robust, sleek, and a great investment for any kitchen!
razdiayahoo –
Haven’t had a chance to verify how accurate this is, but of the ones I’ve tried, I’m really liking this one. Super easy to set target temp, I know what temp I want, nice to just pick the temp. So far, so good.
fsssgxfzfrh –
The device was very easy to set up and add an additional probe. Great feature that the one probe assesses the meat temp and temp of the grill/smoker with the same probe. You only need additional probes if cooking two different cuts/sizes/formats of meat.
jenniferclark –
The ProTemp Plus is a lifesaver! Quick and accurate temperature readings every time. I’d recommend this to anyone who loves to cook meat to perfection.
roberthall –
Best thermometer I’ve ever used! The readings are instant and incredibly accurate. It has improved the quality of my grilling by a mile. Love it!