¿Cómo crear un baño de hielo correctamente preparado?

Most food enthusiasts have a few tools in the kitchen that they can’t cook without, but all of these chefs have one thing in common – a great food thermometer. To make sure your thermometer is accurate, it must be calibrated.

1. ¿Qué es calibrar su termómetro?

Al igual que los relojes pueden funcionar más o menos rápido, los termómetros de alimentos pueden presentar imprecisiones con el tiempo y el uso. Los cambios extremos de temperatura, los daños o el desgaste general pueden afectar la precisión de un termómetro. Si usa su termómetro con frecuencia, le recomendamos revisarlo mensualmente para asegurarse de que funciona a la perfección. Por suerte, puede comprobar la precisión de su termómetro y, en la mayoría de los casos, calibrarlo para que vuelva a leer con precisión.

2. How Do You Testing the Accuracy of Your Thermometer?

There are two methods for testing the accuracy of your thermometer: The Ice Bath Calibration Test and the Boiling Point Calibration Test.

The easiest way to test the accuracy of any thermometer is in a properly made ice bath. If you do this carefully, your ice bath will be 32.0°F within ±0.1°F.

Boiling point calibration tests are trickier than ice bath tests and are unnecessary if an ice bath test proves conclusive. Water boils at 212°F at sea level, but only at sea level. Changes in atmospheric pressure at elevations above or below sea level alter the temperature at which water boils.

Calibrating Your Thermometer in an Ice Bath

Follow these simple steps below to calibrate your thermometer in an ice bath.

Step 1: Fill Vessel with Ice

Find and fill a vessel with ice. Fill it all the way to top. Crushed ice is preferred because there will be fewer gaps between the ice.

Step 2: Add Correct Amount of Water

Fill to about 1/2″ below the top of the ice. Ice should not be floating off of the bottom, if you start to see ice floating off the bottom of the vessel, pour off some water and add more ice.

Step 3: Insert Probe, Gently Stir

Stir the probe in the vertical center of the ice. Allow sufficient time for the thermometer reading to stabilize. Stirring the probe keeps the sensor from resting against an ice cube, which will affect the reading. Remember to keep the probe tip away from the side walls and don’t allow it to rest against the bottom of the vessel. Doing so will give you inaccurate temperature readings.

Step 4: Calibrate

Your thermometer should read 32℉ (0℃). In the ice bath, adjust your dial thermometer as directed by the manufacturer; however, before you attempt to adjust a digital, instant-read thermometer, check that the readings are within the manufacturer’s accuracy specifications. If it’s within the specified tolerance, don’t adjust it.