The Breezo Fan provides precise temperature control for charcoal grills, smokers, and cookers by automating airflow to maintain your desired cooking temperature. It is not necessary for pellet or gas grills, as it is specifically tailored for charcoal-based systems. The Breezo Fan is highly versatile and compatible with most charcoal grills and smokers. Below is a list of common models and installation methods:
1. Models with Included Mounting Plates: For these models, the Breezo Fan can be installed directly using the two Kamado-style mounting plates included in the package. Simply replace the existing vent system by positioning the Breezo Fan over the vent and sealing any gaps with the provided high-temperature flue tape.
Including: Kamado Joe Classic II, Kamado Big Joe III, Primo XL 400 Grill, Primo Oval Large, Primo Smoker, Pit Barrel Cooker, Pit Boss Kamado, Pit Boss Ceramic Kamado, Cypress Ceramic Kamado Bayou Classic Grill, Big Green Egg, Vision Grills Series Classic, Broil King Keg 2000, Char-Griller AKORN Jr. Kamado Charcoal Grill
2. Models with Direct Fit: For these models, the Breezo Fan can be inserted directly into the existing vent opening, and any additional vent holes should be sealed with high-temperature flue tape (included).
Including: Weber Summit Kamado, Weber Smokey Mountain, Backwoods Chubby 3400
3. Smokers with Round Vent Holes: For these models, simply insert the Breezo Fan into one of the round vent holes and cover any remaining holes with the included high-temperature flue tape.
Including: Komodo Kamado, Char-Griller Offset Smoker, Broil King Keg 5000
4. Other Solutions:
- For grills or smokers without a suitable vent opening, you can drill a 1.25-inch hole to attach the Breezo Fan directly, then seal any gaps with high-temperature flue tape.
- For large offset smokers, consider cutting a stainless steel plate to fit your smoker's opening, then drill a 1.25-inch hole to attach the Breezo Fan.
- For Weber Kettle grills, drill a 1.25-inch hole for installation. You can refer to our instructional video for guidance: https://www.youtube.com/watch?v=s_JR379c4-c&t.
5. Additional Mounting Kit Requirements: In most cases, the included Kamado-style mounting plates and high-temperature flue tape are sufficient for installation. If your device is listed above as direct-fit or compatible with a Kamado mounting plate, you don't need an additional mounting kit. However, some setups may require an optional Breezo Fan Mounting Kit.
- 1.18" Universal Mounting Kit: Fits factory-installed ports measuring 1.18" (30 mm) dia.
- 3/4" Threaded Breezo Fan Mounting Kit: Designed to screw into a 3/4" ball valve
- 1.5" Threaded Breezo Fan Mounting Kit: Designed to screw into a 1.5" ball valve (Suitable for OCGF Smoker)
- 2" Threaded Breezo Fan Mounting Kit: Designed to screw into a 2" ball valve
For a Pit Boss K24, check the actual intake opening before choosing an adapter. In a setup support review, the small upper oval openings were too small for the spring adapter. Support identified the lower rectangular draft-door area and a Kamado-style mounting plate as alternatives to assess, but did not confirm a complete fit. Send the exact model, opening measurements, and photos with the lower draft door open before modifying the grill. Do not drill the ceramic body.
If the answers above haven't addressed your concerns, please join our Facebook community group and post your questions there—we're confident we can answer them quickly! https://www.facebook.com/groups/chefstempofficial
