ChefsTemp ProTemp S1 Setup Guide

ProTemp S1 Setup for Weber Original Kettle 22″

Setup verified Kettle Charcoal

The Weber Original Kettle 22" supports ProTemp S1 using the Universal version. Mount S1 through a dedicated 0.3 in (7.8 mm) hole in the steel lid (standard Original Kettle models may not include a lid thermometer). Breezo can also be used with the separate mount noted in this record.

Exact-model compatibility

Does ProTemp S1 Fit Weber Original Kettle 22"?

Yes. ProTemp S1 temperature monitoring is supported for this model, and automatic temperature control is available with the recommended control configuration shown below. S1 version: Universal. S1 install: Mount S1 through a dedicated 0.3 in (7.8 mm) hole in the steel lid (standard Original Kettle models may not include a lid thermometer). S1 adapter: None. S1 drilling: Yes. Breezo: Yes.

S1 temperature monitoring: Yes
Automatic temperature control: Yes
Recommended S1 version: Universal
Drilling: Yes

Start here

ProTemp S1 Temperature Monitoring and Control for Weber Original Kettle 22"

S1 version: Universal. S1 install: Mount S1 through a dedicated 0.3 in (7.8 mm) hole in the steel lid (standard Original Kettle models may not include a lid thermometer). S1 adapter: None. S1 drilling: Yes. Breezo: Yes.

Monitoring only

Temperature monitoring on Weber Original Kettle 22"

Use ProTemp S1 Universal for temperature monitoring. Add wireless probes as needed for food monitoring.

Automatic temperature control

Automatic temperature control on Weber Original Kettle 22" with Breezo

Pair ProTemp S1 with Breezo to monitor temperature and automatically regulate airflow for pit-temperature control.

Your grill

Weber Original Kettle 22" Grill Profile

Brand: Weber
Model family: Original Kettle
Model: Original Kettle 22"
Generation / year: Current
Grill category: Kettle
Fuel: Charcoal

Exact configuration

Recommended ProTemp S1 Setup for Weber Original Kettle 22"

S1 Version	Monitoring	Automatic Control	Control Setup	Drilling	Adapter / Plate
Universal	Yes	Yes	S1 + Breezo	Yes	None

Install the setup

How to Install ProTemp S1 on Weber Original Kettle 22"

ProTemp S1 installation on Weber Original Kettle 22"

Installation method: Mount S1 through a dedicated 0.3 in (7.8 mm) hole in the steel lid (standard Original Kettle models may not include a lid thermometer)
Adapter / plate: None
Drilling required: Yes

This setup is treated as requiring a dedicated S1 mounting hole. For the Universal S1, use approximately 0.3 in (7.8 mm) and secure with the S1 fixing nut. Do not apply this drilling rule to ceramic grills.

Breezo automatic temperature control on Weber Original Kettle 22"

Breezo recommended: Yes
Mount / adapter: Drilled opening / mounting plate

Yes, drill a 1.25" hole

Before you install

Important Setup Notes

No additional S1 limitation identified from the source data. Breezo installation requirements are separate from S1 mounting.

Need a second check?

ChefsTemp support can confirm the setup

This setup has model-specific or conditional details. We recommend confirming the setup with ChefsTemp support before ordering.

Chat with ChefsTemp Support

Purchase path under review

Confirm the product bundle before ordering

The setup guidance on this page can still be reviewed, but the linked purchase recommendation has been withheld because the product mapping needs a consistency check.

Chat with ChefsTemp Support