ChefsTemp ProTemp S1 Setup Guide

ProTemp S1 Setup for Weber Summit Kamado E6

Setup verified Kamado Charcoal

The Weber Summit Kamado E6 supports ProTemp S1 using the Universal version. Replace the built-in lid thermometer and mount S1 through the existing thermometer port. Breezo can also be used with the separate mount noted in this record.

Exact-model compatibility

Does ProTemp S1 Fit Weber Summit Kamado E6?

Yes. ProTemp S1 temperature monitoring is supported for this model, and automatic temperature control is available with the recommended control configuration shown below. S1 version: Universal. S1 install: Replace the built-in lid thermometer and mount S1 through the existing thermometer port. S1 adapter: None. S1 drilling: No. Breezo: Yes.

S1 temperature monitoring: Yes
Automatic temperature control: Yes
Recommended S1 version: Universal
Drilling: No

Start here

ProTemp S1 Temperature Monitoring and Control for Weber Summit Kamado E6

S1 version: Universal. S1 install: Replace the built-in lid thermometer and mount S1 through the existing thermometer port. S1 adapter: None. S1 drilling: No. Breezo: Yes.

Monitoring only

Temperature monitoring on Weber Summit Kamado E6

Use ProTemp S1 Universal for temperature monitoring. Add wireless probes as needed for food monitoring.

Automatic temperature control

Automatic temperature control on Weber Summit Kamado E6 with Breezo

Pair ProTemp S1 with Breezo to monitor temperature and automatically regulate airflow for pit-temperature control.

Your grill

Weber Summit Kamado E6 Grill Profile

Brand: Weber
Model family: Summit Kamado
Model: Summit Kamado E6
Generation / year: Current
Grill category: Kamado
Fuel: Charcoal

Exact configuration

Recommended ProTemp S1 Setup for Weber Summit Kamado E6

S1 Version	Monitoring	Automatic Control	Control Setup	Drilling	Adapter / Plate
Universal	Yes	Yes	S1 + Breezo	No	None

Install the setup

How to Install ProTemp S1 on Weber Summit Kamado E6

ProTemp S1 installation on Weber Summit Kamado E6

Installation method: Replace the built-in lid thermometer and mount S1 through the existing thermometer port
Adapter / plate: None
Drilling required: No

Install the recommended Universal S1 in the grill's existing thermometer opening. No S1 mounting hole needs to be drilled. Breezo mounting requirements, if any, are separate.

Breezo automatic temperature control on Weber Summit Kamado E6

Breezo recommended: Yes
Mount / adapter: Direct fit

direct fit

Before you install

Important Setup Notes

No additional S1 limitation identified from the source data. Breezo installation requirements are separate from S1 mounting.

Purchase path under review

Confirm the product bundle before ordering

The setup guidance on this page can still be reviewed, but the linked purchase recommendation has been withheld because the product mapping needs a consistency check.

Chat with ChefsTemp Support