The Breezo Fan is designed for precise temperature control in charcoal grills, smokers, and cookers, automating airflow to maintain your desired cooking temperature. It is not necessary for pellet or gas grills, as it is specifically tailored for charcoal-based systems. The Breezo Fan is highly versatile and compatible with most charcoal grills and smokers. Below is a list of common models and installation methods:

1. Models with Included Mounting Plates (No Additional Mounting Kit Required): For these models, the Breezo Fan can be installed directly using the two Kamado-style mounting plates included in the package. Simply replace the existing vent system by positioning the Breezo Fan over the vent and sealing any gaps with the provided high-temperature flue tape.

Including: Kamado Joe Classic II, Kamado Big Joe III, Primo XL 400 Grill, Primo Oval Large, Primo Smoker, Pit Barrel Cooker, Pit Boss Kamado, Pit Boss Ceramic Kamado, Cypress Ceramic Kamado Bayou Classic Grill, Big Green Egg, Vision Grills Series Classic, Broil King Keg 2000

2. Models with Direct Fit (No Adapters Needed): For these models, the Breezo Fan can be inserted directly into the existing vent opening, and any additional vent holes should be sealed with high-temperature flue tape (included).

Including: Weber Summit Kamado, Weber Smokey Mountain, Backwoods Chubby 3400

3. Smokers with Round Vent Holes: For these models, simply insert the Breezo Fan into one of the round vent holes and cover any remaining holes with the included high-temperature flue tape.

Including: Komodo Kamado, Char-Griller Offset Smoker, Broil King Keg 5000, Char-Griller Akorn Cooker

4. Other Solutions:

  • For grills or smokers without a suitable vent opening, you can drill a 1.25-inch hole to attach the Breezo Fan directly, then seal any gaps with high-temperature flue tape.
  • For large offset smokers, consider cutting a stainless steel plate to fit your smoker’s opening, then drill a 1.25-inch hole to attach the Breezo Fan.
  • For Weber Kettle grills, a 1.25-inch hole must be drilled for installation. You can refer to our instructional video for guidance: https://www.youtube.com/watch?v=s_JR379c4-c&t.

5. Additional Mounting Kit Requirements: In most cases, the included Kamado-style mounting plates and high-temperature flue tape are sufficient for installation. If your device is listed above under direct-fit or Kamado mounting plate-compatible models, no additional mounting kit is necessary. However, for specific setups, an optional Breezo Fan Mounting Kit may be required.

  • 1.18″ Universal Mounting Kit: Fits factory-installed ports measuring 1.18″ (30 mm) dia.
  • 3/4″ Threaded Breezo Fan Mounting Kit: Designed to screw into a 3/4″ ball valve
  • 1.5″ Threaded Breezo Fan Mounting Kit: Designed to screw into a 1.5″ ball valve (Suitable for OCGF Smoker)
  • 2″ Threaded Breezo Fan Mounting Kit: Designed to screw into a 2″ ball valve

If the listed answers haven’t addressed your concerns, please join our Facebook community group and post your questions there—we’re confident they’ll be addressed quickly! https://www.facebook.com/groups/chefstempofficial